1.Photoes Of Machine
W Beam Steel Crash Barrier Board Making Roll Forming Machine for Highway Road
Panel profiles:
2. Parameters of guardrail machine :
| 1 |
Model No. |
Two waves highway roll forming machine |
| 2 |
Max coil thickness |
3.5mm |
| 3 |
Coli material |
Steel or other |
| 4 |
The bearing capacity of manual decoiler |
5 tons |
| 5 |
shaft material |
45#steel |
| 6 |
Out diameter |
100mm |
| 7 |
numbers of forming steps |
20 stations |
| 8 |
transmission |
Differential gear transmission |
| 9 |
Forming speed |
10-15m/min |
| 9 |
main motor power |
45kw |
| 10 |
voltage |
380V50HZ Three-phase or you need |
| 11 |
dimension |
20.5*1.2*1.5m |
| 12 |
cutting |
Hydraulic cutting |
| 13 |
Cutting power |
13.5kw |
| 14 |
blade material |
Cr12 steel with quenched treated 60-62°c |
| 15 |
control system |
PLC(Delta) |
| 16 |
length tolerance |
±2mm |
| 17 |
spare parts |
easy emaged parts:conk 2pcs,
fuse-link 4pcs
rubber mat: 1 pcs
bolt spanner: 1 pcs
|
| 18 |
The whole line including: Hydraulic decoiler, roll forming machine, cutting part
PLC control system, run-out table.
|
3. Components of W Beam Steel Crash Barrier Board Making Roll Forming Machine for Highway Road :
| No. |
Name |
Unit |
Qty |
| 1 |
decoiler |
set |
1 |
| 2 |
Main forming machine |
set |
1 |
| 3 |
PLC control system |
set |
1 |
| 4 |
Hydraulic pump station |
set |
1 |
| 5 |
Post cut |
set |
1 |
| 6 |
Electric motor |
set |
1 |
| 7 |
Output table |
set |
1 |
4. The main components of highway guardrail Crash Barrier roll forming machine:
(1) Double head Hydraulic Decoiler
(2) Roll-Forming M/C:
Steps: 17 steps Roller Material: CR15
Voltage: 3phase/80V/50-60Hz. Line speed: 10-12m/min;
Rolling chromium thickness: 0.05 mm
(3)Punching device
(4) Cutting Mechanism
It adopts hydraulic drive and automatic location to decide the dimention and cut the target products.
Match equipment: One set of cutting tool, one hydraulic tank, one cutter machine.
Stop to cut, Post cut cutting length tolerance: ± 2mm
Cutting tool material: VR12MOV quenching HRC58-62
(6)Computer control cabinet:
It adopts PLC to control. The target piece length is adjustable and digit of it can be adjusted
Computed mode has two modes: Automatic and manual one.
(7)Fully auto curving machine for crash barrier/highway guardrail:
5. Working Flow:
Uncoiling→Feeding material into machine→Roll forming→Measuring length→ Auto cutting
→Products receiving
Our Services
A. One-Years product warranty.
B. Training and installation available.
C. The technical support for the whole life.
